CPO-5 Palm Control by DSI

SpecialNeedsVehicles -- Adapt Mobility supplies, installs, and supports the CPO-5 Palm Control by DSI (Driving Systems Incorporated). This palm control wirelessly controls turn signals, wipers, lights, horns, and windows with the press of a button.

How does it work?

The CP05 rocker switches send coded signals through an FM desired function. Three harnesses connect the vehicles electrical to the CP05 control box. The turn signals are automatically cancelled by an 8 second timer which is linked to the brake lights. If the brake lights are on the timer resets and start after the brake lights go off.

CP05 OPERATION Driving Systems Incorporated (DSI) CPO 5 palm control.
Each switch can control two operations. The switch action is described as follows:

Primary Operation Press a switch, release quickly. The operation is initiated. (Residual Operation) Press a switch and hold for more than one second or until the residual operation begins.
Right Turn (optional -Window UP)
Wiper Low/Intermittent/Low (Wash)
Wiper Off (Cruise)
Left Turn (optional -Window DOWN)
Horn
High Beam (Flash)

Function of CP05 Switches

Index Finger Switches:
Horn - press and hold for effect
Hi Beam – touch to toggle Hi Beam
Flash – (Hi Beam) press and hold for FLASH

Thumb Switches Primary Operation:

Left Turn – Hold once for Left Turn Signals
Right Turn – Hold once for Right Turn Signals
Wiper –Touch once to change to next wiper sequence:
- Low
- Intermittent Fast
- Intermittent Medium
- Intermittent Slow
- Back to Low
Wiper OFF – Touch once to turn wiper OFF

Residual Operation:

Cruise – (Wiper OFF)Hold for the wired cruise function.
Wash – (Wiper ON) Hold on for more than ½ second to operate the Wash
Window UP– (Left Turn) - Hold on for to operate the driver’s window UP.
Window DOWN – (Right Turn) (Left Turn) (Hi-Beam Toggle) - Hold on for to operate the driver’s window. The operation will toggle the UP then the DOWN.
This option will entail the turn signals to operate by a quick touch not a HOLD

Specifics of the CP05

The CP05 Control Box receives signals from the Palm Control.
The CP05 control box discerns the signals by its micro-computer.
The micro-computer reads the signal relative to the state of the function and processes the operation. This allows the CP05 to have more than six (6) functions from the 3 rocker switches. The function of each switch depends on the duration of time the rocker switch is depressed.
The Control Box is designed with extra relays for domestic vehicles where the brake signal goes through the rear turn signals.
Additional functions can be custom programmed into the CP05 to accommodate special needs (Such as Window Up/Down).
Some operations may require additional relays depending on the power requirements of the operation (i.e. high amperage circuits or incorporating additional operations).

SpecialNeedsVehicles -- Adapt Mobility can install or repair any of these systems controls. To get the process started, please feel free to contact any of our staff --

by phone (520-292-8769)
or by email

and we will be happy to brainstorm with you!