Inside Wheelchair Scooter Lifts

Wheelchair Lifter

The Wheelchair-Lifter raises and tilts your wheelchair horizontally, all at the touch of a button. You don't need to struggle any longer to get your wheelchair in and out of the trunk of your car. Bruno's Wheelchair-Lifter can also be adapted as the Model AWL-150 to raise your wheelchair vertically for storage in a full size van or minivan.

The Wheelchair-Lifter is an electrically operated lift that draws its power from the vehicle's battery. Raising and lowering the wheelchair is as easy as touching a button. When the wheelchair is above the trunk, simply swing the lift arm in and push the DOWN button, then fold the lift arm down.Bruno's Wheelchair-Lifter raises and stores your wheelchair in just a few seconds. No more struggling and awkward lifting. The work is done for you.

The Wheelchair-Lifter can be installed in most auto trunks, station wagons, vans, minivans, sport utility vehicles and hatchbacks as long as the storage area is large enough to accommodate your folding wheelchair.

Bruno's Wheelchair-Lifter is a cost efficient way of loading and unloading your manual folding wheelchair into the back of your vehicle.

Expert installation and complete after-sale service is provided by Bruno's nationwide and international network of dealers.

Cab-Sider

The Cab-Sider gives you the advantage of driving a pickup while being able to store your chair inside, out of the weather. The truck bed is free to use for other things and can even be equipped with a cap, if desired.

Bruno's Cab-Sider is compact enough to allow small items or soft luggage to be placed in the cab area when the chair is stored. Simple installation means easy removal when it comes time to trade in your vehicle.

The Cab-Sider is simple to operate. This easy to use wheelchair lift is electrically powered. All you need to do is roll the chair next to the vehicle, transfer and then use the hand-held controller to do the rest. Unloading the chair is just as simple and trouble-free.

Bruno also offers the EZ RIZER™ seat lift system to assist wheelchair users that may find it difficult to transfer into and out of full-size trucks. Call Bruno's Technical Applications Department for additional information.

The Cab-Sider is available for any full size or compact truck that features an extended cab with a fourth door. This includes Dodge Ram, Chevy S-10, Chevy C/K, Siverado, GMC Sonoma, GMC Sierra and the Ford F-150, F-250 and F-350.

Expert installation and complete after-sale service is provided by Bruno's nationwide and international network of dealers.

Big-Lifter

The Bruno Big-Lifter is electrically powered from the vehicle's battery.

Simply press a button on the controller and the Big-Lifter™ raises and lowers your fully assembled power chair weighing up to 300 pounds, allowing you to manually swing it in or out of the vehicle. Minimum strength is required.

The Bruno Big-Lifter manual swing has a low-resistance design that is easy to swing in and out, and comes complete with a lifting device designed specifically for the power chair.

The Bruno Big-Lifter is a fully adjustable lift that can be installed in just a few hours and requires no structural modification to the vehicle.

The Bruno Big-Lifter securely stores your scooter or power chair in the rear of most vans, minivans and sport utility vehicles: positioned behind the rear seat.

Expert installation and complete after-sale service is provided by Bruno's nationwide and international network of dealers.

Offset Fold-Away

Bruno’s Offset Fold-Away eliminates the struggle of taking apart your trunk lift. The effort to lift the mast is a mere two pounds. It uses dual-spring assist and color-keyed hand-holds to make it so easy, almost anyone can do it!

The offset design feature, in combination with Bruno’s industry-leading adjustable low-profile outer arm, gives you the flexibility to load a partially-assembled scooter from the driver side, behind the vehicle or from the curb side.

Bruno's new Offset Fold-Away lift is engineered to operate with an ergonomic pendant built into the outer lift arm.

Expert installation and complete after-sale service is provided by Bruno's nationwide and international network of dealers.

Space-Saver

The Space-Saver is a take-apart lift that solves the problem of storing a scooter in smaller vehicles with limited trunk space.

The Space-Saver fits closer to the interior trunk wall providing a tighter arc when manually swinging the scooter in and out of the trunk. This allows scooters to be stored in spaces that won't work with more conventional lift designs, and the rotation of the lift arm makes it possible to raise and lower the scooter at the rear or side of the vehicle.

The Space-Saver can be stored anywhere, in the trunk or inside the vehicle itself. And when an additional tower base installation kit is ordered, the lift can be used in more than one vehicle. Contact Bruno's Technical Application Department

The Space-Saver is fully adjustable for height and length and can raise scooters weighing up to 180 lbs. (82 kgs). The lift's tower base can be easily adjusted to fit nearly any car's trunk, ensuring a useful, reliable installation.

The Space-Saver is lightweight and assembly and disassembly can be completed in three simple steps, quickly and easily.

Expert installation and complete after-sale service is provided by Bruno's nationwide and international network of dealers.

Offset Space-Saver

The Offset Space-Saver from Bruno gives you the flexibility to load a partially assembled scooter in the trunk of today's smaller cars. The unique offset design of the lift arm allows you to position your scooter inside narrow trunk openings.

The Offset Space-Saver permits lift installations for vehicles with trunks that previously were considered too small. This means that you don't have to purchase a different type of car. And it means you don't have to go without the benefit of a lift any longer.

The Offset Space-Saver is designed with a low-profile outer arm lift assembly to make storing your scooter even easier. All controls are located conveniently on top of the lift arm. Just press a button and the Offset Space-Saver eliminates the struggle of raising and lowering your scooter.

The Offset Spacer-Saver can be stored anywhere, in the trunk or inside the vehicle. It disassembles quickly and easily, requiring only three steps. When an additional tower base assembly is ordered, it can even be used in more than one vehicle. Contact Bruno's Technical Application Department for installation details.

The Offset Space-Saver can raise and store many types of three-wheel scooters weighing up to 180 lbs, with either front or rear drive.

Expert installation and complete after-sale service is provided by Bruno's nationwide and international network of dealers.

Scooter-Lift Sr.

The Scooter-Lift Sr. is electrically powered from the vehicle's battery. Simply press a button on the controller and the Scooter-Lift Sr. raises and lowers your scooter, allowing you to manually swing it in or out of the vehicle.

The Scooter-Lift Sr. is also available as the VSL-560, featuring Bruno's exclusive Patented Adjustable Sub-Base. The Adjustable Sub-Base fits most vans, adds stability, is compact and allows for faster, simpler installation.

Bruno's Scooter-Lift Sr. can end the struggle of manually trying to lift and store a scooter in your van or minivan. The Scooter-Lift Sr. gives you the convenience you need to transport your scooter and the freedom to travel when and where you like.

The Bruno Scooter-Lift Sr. makes taking your scooter with you simple and easy. No need to remove and store the seat, and our custom manufactured C-Arm and T-Bar Docking Device allow you to raise you scooter at the touch of a button.

The Scooter-Lift Sr. is also available with the added option of a spring-assist feature. this reduces the effort needed to raise and lower the lift arm before and after use.

Expert installation and complete after-sale service is provided by Bruno's nationwide and international network of dealers.

Curb-Sider

Bruno's New Curb-Sider can end the struggle of trying to manually lift and store a scooter in your van or minivan. The New Bruno Curb-Sider was designed to fit most types of vans, minivans, sport utility vehicles and pickups with caps. Plus, the New Curb-Sider can be adapted for use with some types of power wheelchairs, increasing its versatility.

The New Curb-Sider lift is electrically powered from the vehicle's battery. Simply press a button on the hand-held controller, and the New Curb-Sider raises and lowers any scooter weighing up to 200 lbs., effortlessly.

Bruno's New Curb-Sider provides a unique 180 degree powered rotation, which makes it possible to raise, lower and rotate a fully assembled scooter on the curb, at the side of your vehicle, or directly behind it. The New Curb-Sider's rotation feature allows it to stow scooters in vehicles with tailgates.

The lift arm can be folded vertically when not in use and installation does not require any structural modifications to your vehicle.

Expert installation and complete after-sale service is provided by Bruno's nationwide and international network of dealers.

Curb-Sider Super XL3

Outer Arm provides for a 6” powered telescoping extension. Combined with 6” of positioning allows for a 12” total adjustment.

The BRUNO VSL-690 CURB-SIDER SUPER XL3 is a lift for the rear of minivans, full-size vans, sport utility vehicles and station wagons.

The BRUNO VSL-690 CURB-SIDER SUPER XL3 3-axis control unit allows wider and larger scooters, power wheelchairs and equipment to fit into smaller vehicle openings like the new 2001 Daimler Chrysler minivan (with a power hatch).

This unique new lift is easy to operate with an ergonomic control pendent and can lift up to 400 lbs. A 200 lb. lifting capacity version for smaller vehicles such as the Daimler Chrysler PT Cruiser is available.

Expert installation and complete after-sale service is provided by Bruno's nationwide and international network of dealers.